From Concept to Launch: Accelerating EV/HEV Development with Digital Engineering Platforms

Bangalore,  October 22, 2026

Target audience: EV OEMs, Control system developers, Research scholars, BMS design engineers
Read time: 10 minutes
Author: Aravind R Nair

In the history of automobiles, there has always been a search for alternatives or betterment in propulsion systems or fuel used. The first automobile used steam powered propulsion, which later in the 1880’s improved into the petroleum based ICE we know and use even today. But right after the global oil crisis in the 1970’s, the entire industry came into terms that petroleum cannot be a sustainable fuel source. From then, they have invested heavily in searching for alternatives, where eventually, the Japanese Automakers came up with a hybrid vehicle wave in the 1990’s with the Honda Insight and Toyota Prius. However, the technology at the time and the complexity in HEV design and maintenance posed a problem, which made less automakers five it a try for themselves. For a while, It came back to petroleum based ICE’s, which got more and more restricted due to environmental awareness and governmental policies. Since its only going to get worse for automakers, in 2010, Tesla pioneered the Electric vehicle wave, making global automakers to release their own versions and others transition their theme entirely to EVs. Even the wave we’re currently on is also not a sustainable source and could phase out within the decade as material limitations and electricity production demand/carbon footprint. So for the future, research and development is going around advanced battery systems, H2ICE, Hydrogen fuel cell, carbon-neutral/ bio fuels etc.

Why vehicle electrification?

Global automakers are on a decade long plan on reducing their carbon emission to zero by 2035. Overall this is currently done by reducing the engine capacity, increasing volumetric efficiency by forced induction, improved control in combustion chamber temperature and exhaust gas treatment system.

In the recent years, the ICE engineers were pushed around too much with limitations and norms, Weichai power has created an ICE with 50.8% brake thermal efficiency, a difficult number to achieve and a huge answer back to the limits.

But even then, automakers have to face reality and fight the following issues happening in every country:

  1. Stricter Carbon Dioxide and Nitrous Oxide emission norms exponentially getting to an unachievable number in practice.
  2. Governments are imposing higher tax band on higher capacity ICEs thinking in line with emission norms, forcing automakers to go smaller just to not affect overall pricing.
  3. Commercial fuel sources are running out such that few country’s government has been forced to open up the reserve location for petroleum refining.
  4. In India, the rate of increase in petrol vehicles needing engine services, due to implementation of E20 blended petrol, causing catastrophic damage and posing storage concerns, leading to worsened fuel quality in a majority parts of India.
  5. Indian government has initiated multiple policies aiding EV Infrastructure funding, development and taxations with the implementation of schemes such as Faster Adoption and Manufacturing of Electric vehicles scheme (FAME II) and Product Linked Initiatives (PLI).

Moreover, India’s EV market is predicted to be having an exponential rise of CAGR of 52.56% on 2035 based on the publication from Precedence Research. The public transport network in individual state governments are also aiming to reduce overall carbon footprint by converting current diesel buses with electric ones. Karnataka has revised its EV policy to attract Investments onto itself.

Challenges and Complexity in modelling EV/HEV

  1. The Chinese automakers are making larger strides in automotive development, initiating faster design and decision making cycles, using advanced AI/ML algorithms and moving for international businesses with more variants and affordability.
  2. Although one may argue there are lesser components in EV when compared with ICE, There are multiple combination of EV powertrain architecture and considerations to be made to satisfy a wider climate compatibility factors in a country like India.
  3. Each single components within the EV system needs to undergo longer cycles on powertrain sizing aspect to satisfy a wider range of surroundings.
  4. Battery system safety, placement and strength is of higher priority in Indian landscape/roads. Fire hazards from batteries can be fatal and often hard to put out.
  5. A large combination of battery materials have to be analyzed as Lithium cannot be realistically considered of infinitely abundant in the world.
  6. As to be expected in all automotive design, inter-disciplinary contribution is needed even in earlier stages of EV powertrain design, which adds to the concept to reality time in vehicle development.

Overall EV development cycle: How it can be approached?

Currently, the intended EV development process may be in the early stages in development as it has been only in discussion internationally recently. Generally, the current development cycle includes the inevitable market analysis and preferences. Based on this, each individual sub-departments are given targets which undergo long process of development to optimization, only to have further optimization during the later stages of vehicle development. The entire process discussed itself could amount from a couple of months to perhaps years in development phase.

The process discussed from setting the targets to the inputs for later stages can be re-imagined as the flowchart made above. Its explanation is as follows:

  1. After gathering requirements and parameters from the market analysis, the input can be put to an AI/ML algorithm, or a tool such as Simcenter HEEDS for automation and optimization purposes, if the objectives are clearly defined.
  2. This specific data entry tool feeds into a “plant” software, such as Simcenter Amesim, IPG CarMaker, AI CarSim or AVL, which acts as a base for whole vehicle model, requiring inputs in modular nature based on the stage of vehicle development and data available.
  3. The typical EV architecture, Electric motors and control algorithms can be fed into the plant and fed for future design applications.
  4. The mentioned “plant” software shall be co-simulated with tools such as Simcenter TIRE, Mathworks or any other controls development interface which constantly communicate with the plant software in powertrain development.
  5. Based on our test inputs, the output from the plant and co-simulation tools is fed back into the Data entry/Optimization block, which compares the current model performance and its closeness to the optimal range of performance.

A similar design process has been implemented by Renault-Nissan Alliance group, with a group of 12 engineers led by Eric Chauvelier using Simcenter Amesim, MATLAB/Simulink and Excel for development of Renault Zoe and Nissan Leaf. It delivered high-quality product on-time and with reasonable costs, created flexible development platform to support future projects and shortened their time-to-market.

Hence, Due to current market unpredictability and inevitable changes in norms, policies and preferences, the best way an automaker can be on top of it is by investing time and money in the right tools, building processes and reliable judgement to create multiple variants within the year, at a cheaper pricing point.

To know more, contact us!!

error: